5454 aluminum plate for tankers

5454 aluminum plate for tankers is 5mm to 8mm thick and of tempers O, H32 or H111. Plates of varied thicknesses are applied to the bulk head, body and wash boards of a tanker. According to the relevant research report of the European Aluminum Research Association, 0.6L gasoline can be saved per 100km for every 1t lighter of a vehicle. If an aluminum alloy oil tanker is 5t lighter than similar steel tankers. Calculated at 120,000 km per year, half of the no-load mileage can save at least 1800L of fuel, which can save 9,720 yuan per year. The economic benefits brought by the light weight of the aluminum alloy tanker are very prominent.

Tanker applicable 5454 aluminum plate is featured by low weight, strong corrosion resistance, high recycle rate and outstanding safety level. The density of the tanker aluminum plate is only 2.71g/cm3, and the same volume of aluminum alloy is almost only 1/3 of the weight of steel. The application of aluminum alloy on the tanker greatly reduces its own weight. Aluminum alloy has incomparable corrosion resistance than steel. The tank is made of aluminum alloy, and all kinds of liquids or liquefied gas can be transported without any protective layer inside. Because the aluminum alloy tank has good corrosion resistance, it can ensure cleaner oil. Owing to the strong corrosion resistance of 5454 aluminum plate, the aluminum alloy can has no major damage and can be recycled and reused even after a tank is discharged. When the tanker collides, because the aluminum alloy has good electrical conductivity, little static electricity is collected on the tank body, so no sparks will be generated, thereby reducing the occurrence of accidents such as explosions.

Haomei 5454 aluminum plate has less hard and brittle compounds, and it is not easy to produce processing cracks. It has strong plasticity, low welding twill tendency and good welding performance.